PART #1125 5" x 51" Cowl Induction Scoop , 5" Max Height, 51 3/4" Long at Base, 27" Wide at the Front, 36" Wide at the Back (Includes 2" Flange) Some minor trimming may be needed for proper fitment. If you have any questions call 800-822-3392. THIS IS AN OVERSIZED GROUND SHIPMENT

Harwood part #26000: 1987 - 1993 Mustang GT Fiberglass Front End with an 11" Front Spoiler for race cars. This is a new manufactured part that is a light weight fiberglass front end for racing only. Not for street use. This part is built out of a three piece mold and will have mold seams. This is normal and they will sand out and not be seen prior to paint.  A reliable day time phone number is required at checkout so the freight company can contact you prior to delivery. In the event of damage, note it on the Bill of Lading and refuse the shipment. Then, contact Harwood to arrange for a replacement. Contact Harwood at 1-800-822-3392 prior to ordering if you have any questions.

Harwood #10396 1967-69 Chevy Camaro 6" Sunoco Style Lift Off Hood: This hood is a windshield length hood that includes the wiper cowl. Both the hood and the cowl go all the way back to the windshield. It is installed using Harwood's #192 Quick Fastener Kit (Not Included) and does not bolt to the factory hinges. Minor trimming may be needed for proper fitment. This part ships via Truck Freight and a reliable day time phone number is required at check out so that the freight company can contact you prior to delivery. In the event of damage note it on the Bill of Lading and refuse the order. Contact Harwood's sales dept. so that a replacement can be arranged. Once the order has been signed for Harwood will not be responsible for any freight damage or damage claims. 

Harwood #26396 1987-93 Ford Mustang 6" Sunoco Style Lift Off Fiberglass Hood with a Windshield Length Scoop: The hood is stock sized with a 6" scoop that goes all the way back to the windshield. This is a pin on hood that does not bolt to the hinge but is installed using Harwood's #192 Quick Fastener Kit (Not Included). Minor trimming may be needed for proper fitment. The hood ships via Truck Freight and a reliable Day Time phone number is required at checkout so that the freight company can contact you prior to delivery. Once recieved check for any damages...once the Bill of Lading has been signed the customer will be responsible for any damage or damage claims. If you have any questions call us at 800-822-3392. 

Harwood 1970-81 Chevy Camaro 6" Cowl Sunoco Style Fiberglass Lift Off Hood: This is a stock sized hood with a Sunoco Style 6" scoop that goes all the way back to the windshield. It does not bolt to the factory hinges but is pinned on using Harwood's #192 Quick Fastener Kit (Not Included). Minor trimming may be needed for proper fitment. A reliable Day Time phone number is required at check out so that the freight company can contact you prior to shipping. Inspect the part before signing the Bill of Lading for any freight damage. Once the item has been signed for the customer will be responsible for freight damage or freight damage claims. If you have any questions call us at 800-822-3392. 

Harwood's #23396 1978-87 Chevy Malibu 6" Sunoco Style Lift Off Hood: This is a light weight fiberglass hood that does not bolt to the hinge but is pinned on using our #192 Quick Fastener Kit (Not Included). The hood is stock sized with the scoop going all the way back to the windshield. Minor modifications to the hood will be needed in order to install the fasteners. This part ships via Truck Freight and a reliable day time phone number will be required at checkout in order for the freight company to contact you prior to delivery. Inspect the part once it arrives for any shipping damage. Once the order has been signed for Harwood is not responsible for any freight damage or freight damage claims. If you have any questions call Harwood at 800-822-3392.

1981-88 Chevy Monte Carlo 6" Sunoco Style Lift Off Hood: This is a stock size hood with a windshield length scoop that goes all the way back to the windshield. The hood does not bolt to the factory hinge but is pinned on using Harwood's #192 Quick Fastener Kit (Not Included). Minor trimming may be needed for proper fitment and instalation. This part ships via Truck Freight and a reliable day time phone number is required at checkout so that the freight company can contact you for delivery. Inspect the part for damage prior to signing the Bill of Lading. If damage is found note it on the Bill of Lading and refuse the order. Contact Harwood to arrange for a replacement. Once the order has been signed for the customer assumes all responsibility for any freight damage claims. If you have any questions call Harwood at 800-822-3392.

Harwood Part #1701 Six Pack Mopar Scoop: This is a bond on type scoop with two separate openings in the front (12 1/4"L x 3 1/4"H ea.). The highest point is 4 1/4"H in the front and 2 1/2"H in the back.  It's overall length including the mounting flange is 29"L (24" inside), 32 3/4"W including the flange in the front (27" inside) and 32 1/2"W in the back (24 1/2" inside). This part ships via FedEx Ground and a reliable day time phone number is required at checkout. If you have any questions call Harwood at 800-822-3392.

Harwood B-26396 Ford Mustang 6" Sunoco Style Bolt Fiberglass Hood: This is a fiberglass hood that bolts to the original hinges and front latch. It features the "Show Series" underside frame that is open in the back with screens making it completly funtional. Both the top and underside surfaces are black gelcoat that do not have to be painted right away but will need to be. There is no UV protection and the gelcoat will fade over time. Minor trimming may be needed for proper fitment. This item ships via Truck Freight and a reliable day time number is required at checkout so that the freight company can contact you for a delivery appointment. Make sure to look over the part before signing the Bill of Lading and refuse if any damages occur. Once the item has been signed for the customer will be responsible for any freight damage claims. If you have any questions call 800-822-3392 before purchasing. 

Part #17010 1967-76 Dodge Dart: This door is not for street use, but is intended to be used as a light weight alternative for drag racing. Not Compatible With Factory Roll-Up Window Mechanisms. Must use with polycarbonate windows (not included). The windows do not roll up and down. A reliable day time phone number is required at check out so the freight company can contact you. This is an oversized ground shipment. If you have any questions call 800-822-3392

PART #17011 1967-76 Passenger Side Fiberglass Door: This door is not for street use, but is intended to be used as a light weight alternative for drag racing. Not Compatible With Factory Roll-Up Window Mechanisms. Must use with polycarbonate windows (not included). The windows do not roll up and down. A reliable day time phone number is required at check out so the freight company can contact you. This is an oversized ground shipment. If you have any questions call 800-822-3392

1970-72 Dodge Dart Front Drivers Side Fender: This fender bolts to the original mounting points as a lightweight option for drag racing. Minor trimming may be needed for proper fitment. It ships via Truck Freight and a reliable day time phone number is required at checkout for the freight company to contact you.

1970-72 Dodge Dart Front Passenger Side Fender: The fender bolts to the original mounting points and is inteded for a lightweight option for drag racing. This part ships via Truck Freight and a reliable day time phone number is required at checkout so the freight company can contact you. If you have a questions call 800-822-3392.